Nederlands
AOI UH-OM1 II Underwater Housing for OM SYSTEM OM-1 & OM-1 Mark II Cameras. Compatible with AOI / Olympus PEN ports system. Built-in Vacuum Analyzation and Wet Detection System (VWS).
- Safe & easy ordering - Webshop Trustmark certified
- Fast and reliable worldwide shipping with DHL, UPS or PostNL
- Authorised service center for Nauticam, INON....
Ergonomic and compact underwater housing
The AOI underwater housing is compact, light and ergonomic and has a maximum depth of 45 meters. AOI has a range of ports and rings available, so you can use all kind of lenses in this underwater housing. Use the port chart to check which lenses you can use in this underwater housing. There is no port included.
Need help choosing the right lensport and extensions? Just contact us. We are happy to help you.
Built-in Vacuum Analyzation and Wet Detection System (VWS)
After placing the camera in the underwater housing and closing the casing, turn on the vacuum control system. The light will start flashing blue. Then, use the provided pump to create a vacuum in the housing. Continue pumping until the yellow light stops flashing and remains solid. Place the cap on and wait for 4 minutes. The system will now automatically check if the housing is indeed vacuum-sealed. The result of this test will be indicated automatically.
The underwater housing is also equipped with a leak detector. If water is detected inside the housing, a red light will illuminate and an audio alarm will sound.
LED Flash trigger built-in
To trigger external strobes this housing comes with a built-in LED flash trigger. Place the included Hotshoe connector in the hotshoe of the camera and connect it to the Multi-Controle device in the inside of the housing. On the front of the underwater housing, there are two LEDs connected to it. Using a fiber optic cable, the trigger signal can be transmitted to a optional external flash for manual lighting. Flashes that support the Olympus RC protocol can be controlled in TTL-mode (AOI RC strobes, Backscatter HF-1, Backscatter MF-2 for macro).
Specifications
| MODEL NUMBER | AOI UH-OM1 II |
| DESCRIPTION | Underwater Housing for OM SYSTEM OM-1 & OM-1 Mark II Cameras |
| HOUSING COLOR | Translucent Grey |
| COMPATIBLE CAMERA MODELS | OM SYSTEM OM-1 & OM-1 Mark II Cameras |
| MAIN MATERIAL | Housing Body: Polycarbonate |
| DEPTH RATING | 45 Meters |
| LENS PORT SYSTEM | AOI / Olympus PEN Ports System |
| BUILT-IN LED FLASH TRIGGER | Compatible with a) Manual Flash Trigger (with and without Pre-flashes Functions) b) Olympus RC Mode (TTL AUTO, MANUAL, FP TTL AUTO, FP MANUAL) |
| WATER LEAKAGE PROTECTION | Built-in Vacuum Analyzation and Wet Detection System (VWS) |
| BATTERY POWER | Built-in Rechargeable Lithium Polymer Battery (3.7V 220mAH) |
| BATTERY CHARGING | By USB Charger DC5V, 0.5A (not included) Approx. 1.5 Hours for a full charge |
| BATTERY OPERATION TIME | Approx. 4 Days (Based on 3 Dives/Day and 1 Hour/Dive) |
| DIMENSIONS | 195.9mm (W) x 129.7mm (H) x 149.7mm (D) |
| WEIGHT | On Land : Approx.1079 grams (Only included the Housing Body and Body Cap) |
In the box
| Body Cap / Storage Box for PEN Mount Housing （AOI BC-02） |
| USB Type-C Charging Cable; LCD Monitor Hood (AOI LCDH-01) |
| Spare O-Ring for Vacuum Valve Protection Cap x1pc. (AOI SRVV-01) |
| Vacuum Pump (AOI VP-03); Spare Main Seal O-Ring x1pc. (AOI SOR-04) |
| Spare Secondary Seal Ring x1pc. (AOI SSR-03); Silicone Grease (AOI SIGR-5) |
| Silica Gel (AOI SIGE-3) x 1pc.; Lanyard (AOI LYD-01) |
| O-ring Remover ( AOI ORR-02 ); Hot Shoe Connector (AOI HSC-02) |
| Brand | AOI |
|---|---|
| Manufacturer | Importer | Manufacturer: AOI LTD., Unit 2, 20/F, Block E, Wah Lok Industrial Centre, 31-35 Shan Mei Street, Shatin, Hong Kong, info@aoi-uw.com | Importer: UWCameraStore. com, Neon 25, 4751 XA, Oud Gastel, Nederland, info@uwcamerastore.com |
| Max. depth | 45 meters |
| Camera brand | OM SYSTEM / Olympus |
